Zipline poles are made with graphite which must be treated differently than cutting down traditional aluminum poles.
Please follow the following procedures:
Zipline grips are glued to the graphite shaft and the glue must be softened by heating the grips in boiling water.
1. Bring large pot of going water to a boil. Place the grips in the boiling water.
2 . Be assured the water level is above the bottom of the grip.
3. Leave in boiling water for 8 – 10 minutes.
4. Use towel to hold grip. Rubber glove helps you to grasp the shaft. Twist back and forth until the grip can be removed.